Candy Bar Snowman Craft

Hello again! Hope this finds you all doing well and having fun preparing for Christmas! Here’s a cute craft to add to your holiday fun! I’ll show you a basic way to make it, but then the sky is the limit on how you decide to decorate your candy bar snowman. 🙂 You’ll need a candy bar, some white paper, tape, scissors and some markers for a basic snowman. I’ll be showing you how to use some foil also, but it’s up to you if you use it or not.

We’ll start by taping down the extra wrapper on the 2 ends of the candy bar.

As I mentioned already, I wrapped foil around the candy bar to make it look fancier, but if you don’t want to use foil on yours, you can skip ahead to the step using the white paper. To use the foil, tear off a piece a little bigger than the candy bar. This piece is bigger than I needed and I cut in down to a smaller size. You need enough foil to completely cover the candy bar.

Wrap the first side up and hold in place with a piece of tape.

Then wrap the second side up so it crosses over the first edge. I used double-sided tape to secure this side of foil.

Neatly fold the foil in on both ends of the candy bar.

The size of the candy bar you are using will determine what size you cut the white paper into. If you used foil, you will want to cut the white paper so that the foil shows a little on both ends of the candy bar after you wrap the white paper around it. If you didn’t use the foil, you can make the white paper go all the way to both ends of the candy bar.

Also cut the length of the paper so it will wrap around the candy bar and cross over a little on the back side.

Wrap the paper around the candy bar, but don’t tape/glue it in place just yet. Run your fingers down the sides of the candy bar so you leave creases in the paper. Then remove the paper from the candy bar. It’s time to start drawing our snowman. 🙂

You need to draw your snowman in between the middle creases on your paper. This will be the front of the snowman. I added eyes, a nose, a mouth and buttons using markers. I suggest doing all of your drawing before putting the paper around the candy bar.

Wrap the paper around the candy bar and tape it together on the back.

You can draw on a hat and scarf or use bits of colored paper to make them.

Your candy bar snowman can be finished now and shared with that someone special! 🙂 Or here are a few more suggestions you might want to try. You can use a pair of the small stretchy gloves for a hat. And tie or glue on some ribbon for a scarf.

You can use wiggly eyes instead of just drawing eyes or use tiny pom poms. Maybe you’d like to add sequins, snowflakes or real buttons to your snowman. A piece of fleece can be made into a hat or scarf. Let your imagination go wild or just use things that you have on hand. There’s no right or wrong way to make your snowman. 🙂 And each one you make can be different.

I hope you can take this basic candy bar snowman idea and turn it into some special snowmen all your own! Have fun! 🙂

Easy Paper Chain Snowman

Are you ready for a snowman craft? It’s just about a week till Thanksgiving Day and we’ve had some snow here already so I think we’re good to go! This guy is so cute and so simple that you and the kids are going to love making him. And maybe want to make more than one! 😉 Check him out!

All you need to get started is some white paper, a small scrap of black paper, a pencil, a ruler, scissors, glue or double sided tape and some colored pens or makers.

Begin by cutting the white paper into strips approximately 1″ by 6″.

Take 1 strip of white paper and draw a snowman’s face in about the middle of the strip of paper.

Using either your glue or the double sided tape, attach the 2 ends of the paper strip together to form a circle.

Now cut a hat out of the scrap of black paper, making it as wide as the snowman’s head.

Glue only the small area shown in the following picture so that the snowman’s hat will stand up.

Place the hat on the snowman and hold it in place for a few seconds while the glue starts to set up.

Now you will add a few other strips of the white paper to make a chain. To do this, slide one strip through the snowman’s head, as shown in the next picture.

Using either tape or glue, again fasten the ends together in a circle. Continue adding strips of white paper until your snowman is as long as you’d like him to be.

I made my snowman 4 chains long but he can be as long as you like! 😉 I drew some buttons on his “belly”.

If you would like to be able to hang your paper chain snowman up, perhaps on your Christmas tree, you’ll need a piece of string or a paper clip. If you use string, just fold the string in half and tape the ends to the back of the snowman’s head. I’ll show you how to use the paper clip.

Open the paper clip up.

Using regular scotch tape, tape it to the back of the snowman’s head.

And you’re done! Now you have a cute snowman to use to decorate your house for winter! Have fun making paper chain snowmen! 🙂

Qtip Dot Snowman

Who is getting tired of snow? We live in Ohio and we still have a LOT of snow. (Just ask our dog, Rusty, because he finds it hard to go potty when the snow is up to his belly!) It’s starting to melt here and I am looking forward to seeing grass again! Today is also windy so being outside is COLD! But we can have fun making a snowman inside today. 🙂

You’ll only need a few supplies…I used half a piece of blue construction paper, 3 Qtips (also called cotton swabs), a small amount of paint (white, black and red) and a small disposable plate.

You’ll probably want to lay some old newspaper down on the table to protect it from any run away paint drops. 😉 Lay your piece of construction paper on the newspaper and the small disposable plate. Have the Qtips within reach.

Put a very small amount of white paint onto the plate. I actually put more out then I needed.

Using the end of one Qtip, dip it into the paint and start making dots on the construction paper in the shape of a snowman. I suggest starting at the top with the snowman’s head to avoid laying a hand or arm on the freshly painted dots.

Make a second snowball for the snowman’s belly.

And then a 3rd snowball for the bottom of the snowman.

Now put a very small amount of black paint on the plate. And get a fresh Qtip.

Add dots to make a face…a few dots on his belly for buttons…add black dots for his stick arms…and more dots for his hat.

Now it’s time for a very small amount of red paint to be put on the plate. And grab a third fresh Qtip.

Add some red dots around the snowman’s “neck” to make a scarf.

And you’re finished! Great job! I hope you had fun making a snowman while you stayed inside where it’s warm! 🙂

Is It Too Soon to Build a Snowman?

How do you feel about snowmen? I love them!! Especially the crafty kind that you can make in your house and they never melt! 😉 We had some cold days recently that felt like winter and we even had a light dusting of snow, so I got to thinking about snowmen and decided to make some. (Now it’s warmed back up and the temperature has been in the 60’s.) This is an easy craft for kids and takes just some “normal” kind of things you might have around your house. Let’s take a look at my snowmen…

I thought they turned out to be pretty cute! Some things that you’ll need to make these snowmen are empty toilet paper rolls, white paint, paint brush, pipe cleaners, small pom poms, ribbon or yarn or felt, maybe a button or two, wiggly eyes, orange and black markers and either a bottle of glue or a glue gun. (I used the glue gun.)

The first step is to paint the empty toilet paper rolls with white paint. Let them dry however long your type of paint requires.

Glue on 2 wiggly eyes. It doesn’t really matter what size the wiggly eyes are. I used 3 different sizes for my snowmen.

Cut a pipe cleaner in half…or even smaller…to use for the top part of the snowman’s ear muffs. Glue the 2 ends to opposite sides of the toilet paper roll. Place the ends on either side of the eyes in a place where the snowman’s ears might be if he had some. 😉

Next glue a pom pom over each end of the pipe cleaner to finish making the ear muffs.

Use the orange marker to draw a triangle below the wiggly eyes to be the snowman’s carrot nose. Use the black marker to draw on a mouth and eyebrows. (I drew the eyebrows on after I took the next picture. Oops!)

For the snowman’s scarf you can use pieces of yarn or ribbon or felt or fabric…you get the idea. 😉 For this snowman, I put 3 pieces of yarn together. Glue the scarf in one spot on the back of the snowman. Then wrap each side around to the front and cross one side over the other and glue in place.

I glued a little star button on top of where the 2 sides cross in the front. You can add 3 black dots for the stones or buttons on the snowman’s tummy, if you like.

And there you are! Great job! You’ve made a snowman! 🙂

For my second snowman, I followed the same steps, but for his/her scarf I took 3 pieces of yarn and braided them together. I tucked one end around the other in front, like you do when you are beginning to tie your shoes. Then I glued it in place.

For my third snowman, I again followed the same steps, except this time I made his/her scarf out of a piece of ribbon. And I glued on a matching button.

You can make your snowman look however you like. He/she might look different because you have different materials to use than what I had. You can shape his/her mouth in different ways to make him/her look happy or sad or silly. I’m sure he or she will look great! The important thing is to have fun making your snowmen! 🙂